3c351ee6

10:19. Selector lever

Selector lever
1 – ashtray;
2 – lighter illumination socket;
3 – forward section of the central console;
4 – a box for storage of small objects;
 5 – central console;
6 – selector cable;
7 – socket;
8 – selector lever

Removal

PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the rechargeable battery.
2. Remove an ashtray and turn out two screws.
3. Disconnect the socket of illumination of the lighter and remove forward section of the central console.
4. Remove a box for storage of small objects.
5. Turn out two bolts and four screws and remove the central console.
6. Move the selector lever to a position P.
7. Turn out two bolts of fastening of a cover of a cable of the selector.
8. Turn out nuts of fastening of a cable of the selector.
9. Disconnect the socket.
10. Turn out four nuts of fastening of the support plate of the selector and remove the selector lever assembled.

Installation

PERFORMANCE ORDER
1. Install the lever of the selector and fix the support plate of the selector by four nuts.

Inhaling moment: 15,7–22,6 N • m

2. Connect two sockets.
3. Move the selector lever to a position P.
4. Establish a selector cable.
5. Screw and tighten nuts of fastening of a cable of the selector.

Inhaling moment: 7,8–10,8 N • m

6. Tighten bolts of fastening of a cover of a cable of the selector.

Inhaling moment: 7,8–10,8 N • m
7. Screw two bolts and four screws of fastening of the central console.
8. Install a box for storage of small objects.
9. Establish forward section of the central console and connect the lighter illumination socket.
10. Screw two screws and install an ashtray.
11. Connect a wire to the negative plug of the rechargeable battery.
12. Check correctness of operation of the lever of the selector.