10.7. Radiator of cooling of liquid of the automatic transmission
Radiator of cooling of liquid of the automatic transmission:
1 – washer; 2 – connecting bolt; 3 - entrance hose of liquid of the automatic transmission (colder hose); 4 - output hose of liquid of the automatic transmission (hotter hose);
|
5 - entrance tube of liquid of the automatic transmission (colder hose); 6 - output tube of liquid of the automatic transmission (hotter hose); 7 – radiator |
Removal
PERFORMANCE ORDER |
1. Lift the car and fix on support. |
2. Turn out seven screws and remove right mudguards of a motor compartment. |
3. Install under a radiator the pallet for collecting liquid. |
4. Disconnect entrance and output hoses of liquid of the automatic transmission. |
5. Remove entrance and output tubes of liquid of the automatic transmission. |
6. Remove a radiator (see subsection 4.12). |
|
Usanovka
PERFORMANCE ORDER |
1. Establish a radiator (see subsection 4.12). |
2. Establish entrance and output tubes of liquid of the automatic transmission. Inhaling moment: 32–47 N • m
|
3. Pull entrance and output hoses over tubes of liquid of an automatic box before so that end faces of hoses reached fillets on tubes. |
4. Establish a hose clip on a hose in the center of marking and under the corner shown in the drawing. |
|
5. Check that the clip of a hose does not concern any other parts. |
6. Establish right mudguards of a motor compartment and fix by seven screws. |
7. Lower the car. |
8. Check liquid level in the automatic transmission. |
|