12.4. Belt of the drive of the pump of the amplifier of steering

Check

PERFORMANCE ORDER
1. Check a belt of the drive of the pump of the amplifier of steering for lack of cracks, wear and development. If necessary, replace a belt.
2. Measure by special adaptation a belt tension.

Tension of a belt of the drive of the pump of the amplifier of steering and compressor of the conditioner:
New belt: 491–589 N
The belt which was in the use: 422–497 N

3. In the absence of the special device, check a belt tension, having pressured him by effort 98 N (10 kg) in the place located on identical removal from pulleys and measure a belt deflection.

Generator drive belt deflection
New 8–9 mm
Being in the use of 9-10 mm

Tension

PERFORMANCE ORDER
1. Weaken a hinged bolt And, a lock-nut In and nuts of fastening of an arm. Rotating an adjusting bolt, adjust a belt tension.

Inhaling moment:
Bolt And: 37–52 N • m
Nut In: 37–52 N • m
Nut With: 37–52 N • m

Replacement

PERFORMANCE ORDER
1. Weaken a hinged bolt And, a lock-nut In and nuts of fastening of an arm.
2. Rotating an adjusting bolt, weaken a belt tension.
3. Take off a belt.
4. To establish a new belt, and adjust a belt tension.