12.7. Steering transfer

Steering transfer

1 – nut of fastening of a tip of steering draft;
2 – rotary fist;
3 – pressure head hose;
4 – returnable hose;
5 – consolidation cover;
6 – coupling bolt;
7 – nuts of fastening of steering transfer;
8 – steering transfer and drafts;
9 – draft of gear shifting;
10 – draft of the choice of transfers;
11 – arm

Removal

PERFORMANCE ORDER
1. Weaken nuts of fastening of forward wheels.
2. Lift a forward part of the car and fix on support.
3. Remove wheels.
4. Take forelocks and turn off nuts of fastening of pins of spherical hinges of tips of steering thirsts for rotary fists.
5. A stripper of OK130 283 021, squeeze out pins of spherical hinges of tips of steering drafts from rotary fists.

Prevention

For an exception of damage of a carving of a pin, screw a temporary nut on a carving.


6. Turn out two bolts and nuts and remove an arm of fastening of hoses to the transmission.
7. Disconnect returnable and pressure head hoses.

Prevention

At a detachment of hoses use rags or a suitable container for collecting liquid from hydraulic system of the amplifier of steering.


8. Turn out two bolts of fastening of the universal hinge and a coupling bolt of fastening of an intermediate shaft.
9. Turn out four nuts of fastening of a steering column to the car, then uncover consolidation.

10. Turn out four nuts of fastening of steering transfer.

11. Disconnect drafts of the choice and gear shifting from the transmission.
12. Remove steering transfer on the right side of the car.

Installation

PERFORMANCE ORDER
1. Establish steering transfer on the right side of the car.
2. Fix steering transfer by four nuts.

Inhaling moment: 37–52 N • m

3. Tighten a bolt of fastening of an intermediate shaft.

Inhaling moment: 18–26 N • m

4. Establish a consolidation cover, then tighten four nuts of fastening of a steering column in the car.
5. Tighten two coupling bolts of fastening of the universal hinge.

Inhaling moment: 18–26 N • m

6. Connect returnable and pressure head hoses.
7. Establish an arm of fastening of hoses to the transmission and fix it by bolts and nuts.
8. Establish pins of spherical hinges of tips of steering drafts in rotary fists.
9. Screw nuts of fastening of pins, tighten them the required moment and install forelocks.

Inhaling moment: 29–44 N • m

10. Connect thirst of the choice for the transmission.

Inhaling moment: 38–51 N • m

12. Establish wheels.
13. Lower the car.