12.8. Pump of the amplifier of steering

Pump of the amplifier of steering

1 – hinged bolt;
2 – lock-nut;
3 – nuts of fastening of an arm;
4 – adjusting bolt;
5 – pump drive belt;
6 – pressure head hose;
7 – returnable hose;
8 – bolts of fastening of an arm;
9 – pump of the amplifier of steering

Removal

PERFORMANCE ORDER
1. Turn out a hinged bolt of fastening of the pump of the amplifier of steering.
2. Turn out a lock-nut of fastening of the pump of the amplifier of steering.
3. Turn out nuts of fastening of an arm of the pump of the amplifier of steering.
4. Take off a pump drive belt.
5. Turn out nuts and disconnect a pressure head hose from the pump.
6. Release a clip and disconnect the soaking-up filter.
7. Turn out three bolts of fastening of an arm of the pump of the amplifier of steering.
8. Remove the pump of the amplifier of steering.

Installation

PERFORMANCE ORDER
1. Install the pump of the amplifier of steering.
2. Tighten three bolts of fastening of an arm of the pump of the amplifier of steering.

Inhaling moment: 37–52 N • m

3. Install the soaking-up filter on the pump.
4. Connect a pressure head hose to the pump and fix it by a bolt.

Inhaling moment: 44–54 N • m

5. Establish a pump drive belt.
6. Tighten nuts of fastening of an arm.

Inhaling moment: 37-52H • m

7. Tighten a lock-nut and a bolt.

Inhaling moment: 37-52H • m

8. Tighten a hinged bolt.

Inhaling moment: 37-52H • m