14:12. Vacuum amplifier of brakes

Removal

PERFORMANCE ORDER
1. Remove the main brake cylinder.
2. Disconnect a vacuum hose from the unilateral valve of the vacuum amplifier of brakes.
3. In interior of the car remove the spring forelock and to remove a pin with a head and an opening under the forelock.
4. Turn off four nuts of fastening of the vacuum amplifier of brakes.
5. Remove the vacuum amplifier of brakes.
6. Remove laying of an arm of the vacuum amplifier of brakes.

Installation

PERFORMANCE ORDER
1. Establish the vacuum amplifier of brakes with new laying on a partition of a motor compartment and fix by four nuts.

Inhaling moment: 19–26 N • m
2. Establish a pin with a head and an opening under the forelock and fix it by the new spring forelock.
3. From a motor compartment attach a vacuum hose to the unilateral valve of the vacuum amplifier of brakes.
4. Install the main brake cylinder on the vacuum amplifier of brakes and fix by two nuts.

Inhaling moment: 9,8–16 N • m
5. Connect brake tubes and tighten connecting nuts of fastening of tubes.

Inhaling moment: 13–22 N • m
6. Connect the socket of the sensor of level of brake fluid.
7. Fill a popolnitelny tank of the brake system with brake fluid to a tag the MOVE.
8. Remove air from a hydraulic contour of the brake system.
9. Check lack of leak of brake fluid.
10. Check and, if necessary, adjust height of installation of a pedal and a free wheeling of a pedal of a brake.