14:16. Parking brake

Parking brake

1 – gear shifting lever handle;
2 – overlay of the central console;
3 – central console;
4 – screws;
5 – assembly bolts;
6 – lever of the parking brake;
7 – returnable spring;

8 – back part of a cable of the parking brake;
9 – forward part of a cable of the parking brake;
10 – clips;
11 – bolts;
12 – adjusting nut;
13 – box of the control unit of a safety cushion

Removal

Prevention

Install the switch of the parking brake so that he contacted with the lever of the parking brake when the lever – is completely lowered.

PERFORMANCE ORDER
1. Remove the gear shifting lever handle.
2. Turn out two screws of fastening of an overlay of the central console after a lighter illumination socket detachment.
3. Turn out four screws and two bolts in a back part of the central console and remove the central console.
4. Turn out adjusting nuts.
5. Turn out two assembly bolts fixing knot of the lever of the parking brake to the car bottom.
6. Turn out the screw, the fixing switch of the parking brake to lever knot.
Prevention

If the car moved recently, the system of production of the fulfilled gases will be hot.

7. Remove a returnable spring and exempt two back cables of the parking brake from a forward cable.
8. Extend a forward cable of the parking brake from rubber consolidation.
9. If it is necessary to remove one or both back cables of the parking brake, remove the clips fixing a cable cover to the body bottom.
10. Turn out the bolt and two nuts fixing each back cable of the parking brake to the body bottom.
11. Remove the clip fixing a cover of a cable of the parking brake to a brake board.
12. Disconnect a cable of the parking brake from a back brake shoe and extend it from a brake board.

Installation

PERFORMANCE ORDER
1. Pass a cable of the parking brake through a brake board and fix a cable cover by a clip.
2. Fix a cable of the parking brake on a back brake shoe.
3. Lay a back part of a cable on the bottom of the car and fix it by a bolt and two nuts.

Inhaling moment:
Bolts: 7–10 N • m
Nuts: 19–26 N • m
4. Fix by a clip a forward part of a back cable of the parking brake on the car bottom.
5. If a forward part of a cable was removed, insert it through rubber consolidation and connect a lobby and back parts of cables of the parking brake.
6. In interior of the car connect a forward part of a cable to the lever of the parking brake and screw an adjusting nut.
7. Fix the cable regulator by a clip.
8. If acted, install the switch of the parking brake and fix it by the screw.
9. Establish knot of the lever of the parking brake on the bottom of the car and fix it by two bolts.

Inhaling moment: 19–26 N • m
10. Adjust the parking brake.
11. Install the central console and fix by two bolts and four screws.
12. Connect the socket of the lighter and establish an overlay of the central console.
13. Install the gear shifting lever handle.