15.6. Back stabilizer of cross stability

Removal

PERFORMANCE ORDER
1. Lift a back part of the car and fix on support.
2. Remove a wheel.
3. Turn out nuts of fastening of an earring of the stabilizer of cross stability.
4. Turn out a bolt of fastening of an earring of the stabilizer and take off stabilizer earrings.
5. Turn out an assembly bolt of fastening of an arm of the stabilizer and plug of an arm of the stabilizer.
6. Remove the stabilizer of cross stability.

Installation

PERFORMANCE ORDER
1. Install stabilizer plugs according to the adjusting tags applied on the stabilizer.
2. Establish arms of the stabilizer and fix by bolts.

Inhaling moment: 43–61 N • m
3. Screw a bolt of fastening of an earring of the stabilizer to a cross beam.

Inhaling moment: 43–61 N • m
4. Screw nuts of fastening of an earring of the stabilizer to the stabilizer.

Inhaling moment: 43–61 N • m

Prevention

Tighten bolts and nuts of fastening of the stabilizer the required moment after installation of the car on wheels.