16:10. Door lock cylinder

Removal

PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the rechargeable battery.
2. Remove a door upholstery.
3. Turn out one screw of fastening of an arm of the internal handle of opening of a door.
4. Remove an arm of the internal handle of opening of a door.
5. Remove from a door the loudspeaker in the following order:
      a. turn out three screws of fastening of the loudspeaker to a door;
      b. disconnect a plait of wires from a door frame;
      c. remove the loudspeaker and disconnect sockets.
6. Remove a pylevlagozashchitny film, gradually separating it from a door frame.
7. Disconnect draft of the lock of a door from the external handle of a door.
8. Disconnect the cylinder draft of the lock of a door from the external handle of a door.
9. Turn out two bolts of fastening of the external handle of a door.
10. Remove the external handle of a door.
11. Remove the lock cylinder from the external handle of a door.

Installation

PERFORMANCE ORDER
1. Install the lock cylinder in the external handle of a door.
2. Establish the holder of the cylinder of the lock on the external handle of a door.
3. Install the external handle of a door.
4. Screw two bolts of fastening of the external handle of a door.

Inhaling moment: 9–13 N • m
5. Connect the cylinder thirst of the lock of a door for the external handle of a door.
6. Connect thirst of the lock of a door for the external handle of a door.
7. Establish on a door a pylevlagozashchitny film in the following order:
      a. fix a pylevlagozashchitny film on a door;
      b. remove the electric socket of a plait of wires of a door;
      c. bring drafts of the internal handle of opening of the lock of a door out of a pylevlagozashchitny film.
8. Install the loudspeaker and fix it by three screws.
9. Establish an arm of the handle and fix it by one screw.
10. Establish a door upholstery.
11. Connect a wire to the negative plug of the rechargeable battery.