16:13. Door glass

Removal

PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the rechargeable battery.
2. Remove a door upholstery.
3. Turn out one screw of fastening of an arm of the internal handle of opening of a door.
4. Remove an arm of the internal handle of opening of a door.
5. Remove from a door the loudspeaker in the following order:
      a. turn out three screws of fastening of the loudspeaker to a door;
      b. disconnect a plait of wires from a door frame;
      c. remove the loudspeaker and disconnect sockets.
6. Remove a pylevlagozashchitny film, gradually separating it from a door frame.
7. Remove glass in the following order:
      a. repeatedly connect the switch of management of a window regulator;
      b. connect a wire to the negative plug of the rechargeable battery;
      c. include ignition and move glass to half-open situation;
      d. switch off ignition;
      e. disconnect a wire from the negative plug of the rechargeable battery;
      f. turn out two bolts of fastening of glass to a window regulator;
      g. inclining and lifting a back part, remove glass from the outer side of a door.

Installation

PERFORMANCE ORDER
1. Weaken one bolt of fastening of a guide of glass.
2. Establish glass in the following order:
      a. insert outside of a door at first a forward part of glass, then, turning and lowering, establish glass at a door and arrange it on a window regulator arm;
      b. screw, but do not tighten finally, glass fastening bolts;
      c. repeatedly connect the switch of management of a window regulator;
      d. include ignition and move glass up and down to intensify function of management of a window regulator;
      e. if necessary, adjust the provision of glass;
      f. switch off ignition;
      g. disconnect a wire from the negative plug of the rechargeable battery;
      h. tighten two bolts of fastening of glass to a window regulator;

Inhaling moment: 2–3 N • m
      i. tighten one bolt of fastening of a guide of glass;
      
Inhaling moment: 9–13 N • m
3. Establish on a door a pylevlagozashchitny film in the following order:
      a. fix a pylevlagozashchitny film on a door;
      b. remove the electric socket of a plait of wires of a door;
      c. bring drafts of the internal handle of opening of the lock of a door out of a pylevlagozashchitny film.
4. Install the loudspeaker and fix it by three screws.
5. Establish an arm of the handle and fix it by one screw.
6. Establish a door upholstery.