16:18. Ceiling

Ceiling

  
1 – handles;
2 – sun-protection peak;
3 – ceiling;
4 – thermal insulation plates; 		5 – lens;
6 – plafond of internal illumination of salon;
7 – central holders

Removal

PERFORMANCE ORDER
1. Turn out two screws of fastening of sun-protection peaks.
2. Remove sun-protection peaks and the central holders of sun-protection peaks.
3. Remove decorative caps and turn out screws of fastening of side handles.
4. Remove three side handles.
5. Remove the lens from a plafond of illumination of salon.
6. Remove a bulb.
7. Turn out two screws of fastening of a plafond of illumination of salon.
8. Disconnect the electric socket and remove a plafond of illumination of salon.
9. Remove an upholstery forward, average and back it is resistant.
10. Remove four screw clips.
11. Remove a ceiling and plates of thermal insulation.

Installation

PERFORMANCE ORDER
1. Check that plates of thermal insulation are properly established in a ceiling.
2. Further installation is carried out to the sequences, the return to removal.