16:19. Cowl

Cowl

 
1 – moisture protective strip;
2 – rubber emphasis;
3 – cowl hinge;
4 – cowl;
5 – cowl support; 		6 – holder of a support of a cowl;
7 – cable of opening of the lock of a cowl;
8 – cowl lock (latch);
9 – windshield washer hose

Removal

PERFORMANCE ORDER
1. Open a cowl and fix it on a support.
2. Support a cowl so that it did not fall after a reversing of bolts of fastening of hinges.
Attention

You carry out removal of a cowl with assistants.
3. Turn out four bolts of fastening of hinges of a cowl.
4. Separate a cowl support from a cowl.
5. Remove a cowl.

Installation
Attention

You carry out installation of a cowl with assistants.

PERFORMANCE ORDER
1. Installation is carried out to the sequences, the return to removal.
2. Tighten bolts of fastening of a cowl by hand.
3. Close a cowl.
4. Check gaps on cowl perimeter. If necessary, moving a cowl in the extended openings for bolts of fastening of a cowl, adjust the provision of a cowl so that gaps on perimeter were uniform and corresponded to the required values. After adjustment of situation, tighten bolts of fastening of a cowl.
      
Inhaling moment: 18–26 N • m
5. Check alignment of the lock mechanism and a shock plate of a cowl. If necessary, weaken bolts and, moving, adjust the provision of a shock plate of a cowl.
      
Inhaling moment: 8–11 N • m