16.2. Front bumper

Front bumper


1 – overlay of a bumper;
2 – clip;
3 – bolt;
4 – bumper arm;
5 – foamy absorber of energy;
6 – amplifier of a bumper;
7 – bolt of fastening of a bumper

Check

PERFORMANCE ORDER
Visually check a condition of an overlay of a front bumper for absence of damage and check reliability of fastening of a bumper.

Removal

PERFORMANCE ORDER
1. Remove a left headlight.
2. Remove a right headlight.
3. Turn out nuts of fastening of the top part of the left side of a bumper.
4. Turn out nuts of fastening of the top part of the right side of a bumper.
5. Remove three clips from the basis of the left antisplash guard.
6. Remove two clips from the left side located under a cover.
7. Pressing an antisplash guard, turn out one screw from the left side of a bumper.
8. Repeat these operations for the right side.
9. Remove four clips from the bumper basis.
10. Remove six clips from the top part of a bumper.
11. Turn out two bolts from the left support of a bumper.
12. Repeat these operations for the right side.
13. Remove a front bumper.

Installation

PERFORMANCE ORDER
Establish a front bumper in the sequence, the return to removal.

Inhaling moment: 31–38 N • m