16.3. Rear bumper

Rear bumper


1 – overlay of a bumper;
2 – clip;
3 – screw;
4 – antisplash guard;
5 – foamy absorber of energy;
6 – amplifier of a bumper;
7 – bolt of fastening of a bumper;
8 – internal panel of finishing

Check

PERFORMANCE ORDER
Visually check a condition of an overlay of a rear bumper for absence of damage and check reliability of fastening of a bumper.

Removal

PERFORMANCE ORDER
1. Remove two clips which fix the left back mudguard to an antisplash guard.
2. Remove the left mudguard.
3. Remove two clips which fix the right back mudguard to an antisplash guard. Turn out one bolt which fixes the right back antisplash guard to a wing.
4. Turn out one bolt which fixes the right back antisplash guard to a wing.
5. Pressing an antisplash guard, turn out one screw from the left side of a bumper.
6. Repeat this operation for the right side.
7. Turn out one nut on the left side in a luggage carrier.
8. Repeat this operation for the right side.
9. Remove six clips of fastening of the top part of a bumper.
10. Turn out two bolts from the left back support of a bumper.
11. Repeat this operation for the right side.
12. Remove a rear bumper.

Installation

PERFORMANCE ORDER
Establish a rear bumper in the sequence, the return to removal.

Inhaling moment: 31–38 N • m