3c351ee6

16.4. Forward door

Forward door


1 – cover of the internal handle;
2 – internal handle of opening of a door;
3 – door upholstery;
4 – internal handle of a door assembled;
5 – arm of the internal handle of a door;
6 – door upholstery arm;
7 – pylevlagozashchitny film;
8 – door loudspeaker;
9 – glass;
10 – window regulator;
11 – the directing glass sealant;
12 – external slip;
13 – the guide flew down;
14 – external handle of opening of a door;
15 – door lock;
16 – moisture protective consolidation of a door;
17 – door panel;
18 – limiter of opening of a door;
19 – door hinge;
20 – shock plate

Removal

PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the rechargeable battery.
2. Remove a door upholstery.
3. Turn out one screw of fastening of an arm of the internal handle of opening of a door.
4. Remove an arm of the internal handle of opening of a door.
5. Remove from a door the loudspeaker in the following order:
      a. turn out three screws of fastening of the loudspeaker to a door;
      b. disconnect a plait of wires from a door frame;
      c. remove the loudspeaker and disconnect sockets.
6. Remove the internal handle of a door in the following order:
      a. turn out three screws of fastening of the handle of a door;
      b. disconnect two drafts from the handle;
      c. remove the internal handle of a door.
7. Remove a pylevlagozashchitny film, gradually separating it from a door frame.
8. Remove glass in the following order:
      a. repeatedly connect the switch of management of a window regulator;
      b. include ignition and move glass to half-open situation;
      c. switch off ignition;
      d. turn out two bolts of fastening of glass to a window regulator;
      e. inclining and lifting a back part, remove glass from the outer side of a door.
9. Remove a window regulator in the following order:
      a. disconnect the electric socket of the engine of the drive of a window regulator;
      b. turn out six nuts of fastening of a window regulator to a door;
      c. through an opening in the internal panel of a door remove a window regulator.
10. Remove the directing glass sealant.
11. Turn out one bolt and remove a glass guide from a door.
12. Remove the door lock in the following order:
      a. disconnect two drafts from the external handle of a door;
      b. turn out three screws of fastening of the lock of a door;
      c. turn out two bolts of fastening of the external handle of a door;
      d. remove the external handle of a door.
13. Remove an external rear-view mirror in the following order:
      a. disconnect the electric socket;
      b. turn out three screws and remove a mirror.
14. Remove a plait of wires in the following order:
      a. disconnect sockets of a plait of wires from a door frame;
      b. take a plait of wires through an opening in the internal panel of a door.
15. Turn out a bolt of fastening of the limiter of opening of a door to a body.
16. Turn out bolts of fastening of both hinges and remove a door from the car.

Installation

PERFORMANCE ORDER
1. Establish a door in the following order:
      a. install properly a door on the car;
      b. screw bolts of fastening of both hinges.
      
Inhaling moment: 17–29 N • m
2. Establish moisture protective consolidation of a door.
3. Screw a bolt of fastening of the limiter of opening of a door to a body.
      
Inhaling moment: 22–27 N • m
4. Establish a plait of wires in the following order:
      a. insert a plait of wires through an opening in the internal panel of a door;
      b. fix five sockets of a plait on a door frame.
5. Establish an external rear-view mirror in the following order:
      a. establish an external rear-view mirror on a door in initial situation;
      b. fix a mirror by three screws;
      c. connect the electric socket.
6. Put the door lock in the following order:
      a. put the door lock through an opening in the internal panel of a door;
      b. fix the door lock by three screws.
      
Inhaling moment: 4–6 N • m
7. Install the external handle of a door in the following order:
      a. connect two drafts of the lock of a door;
      b. fix by two bolts external door handles.
8. Establish a glass guide in the following order:
      a. install a glass guide through an opening in the internal panel of a door;
      b. fix by a bolt directing to glasses.
      
Inhaling moment: 9–13 N • m
9. Establish the directing glass sealant. For lubricant at installation use soap solution.
10. Establish a window regulator in the following order:
      a. install a window regulator through an opening in the internal panel of a door;
      b. fix a window regulator by nuts;
      
Inhaling moment: 9–13 N • m
      
c. connect the electric socket to the window regulator engine.
11. Establish glass in the following order:
      a. insert outside of a door at first a forward part of glass, then, turning and lowering, establish glass at a door and arrange it on a window regulator arm;
      b. screw, but do not tighten finally, glass fastening bolts;
      c. repeatedly connect the switch of management of a window regulator;
      d. connect a wire to the negative plug of the rechargeable battery;
      e. include ignition and move glass up and down to intensify function of management of a window regulator;
      f. if necessary, adjust the provision of glass;
      g. switch off ignition;
      h. disconnect a wire from the negative plug of the rechargeable battery;
      i. tighten two bolts of fastening of glass to a window regulator;
      
Inhaling moment: 9–13 N • m

      j. tighten one bolt of fastening of a guide of glass;
      
Inhaling moment: 9–13 N • m


      k. connect a wire to the negative plug of the rechargeable battery;
      I. include ignition;
      m. move glass down;
      n. switch off ignition;
      o. disconnect a wire from the negative plug of the rechargeable battery;
      p. remove the window regulator switch.
12. Establish on a door a pylevlagozashchitny film in the following order:
      a. fix a pylevlagozashchitny film on a door;
      b. remove the electric socket of a plait of wires of a door;
      c. bring drafts of the internal handle of opening of the lock of a door out of a pylevlagozashchitny film.
13. Install the internal handle of a door in the following order:
      a. connect two drafts of the lock of a door to the handle;
      b. fix the handle by three screws.
      
Inhaling moment: 3–4 N • m
14. Install the loudspeaker and fix it by three screws.
15. Establish an arm of the handle and fix it by one screw.
16. Establish a door upholstery.
17. Establish a cover of the internal handle of a door and fix it by one screw.
18. Fix a door upholstery.
19. Establish an internal moisture protective strip.
20. Connect a wire to the negative plug of the rechargeable battery.