| 1. Check a condition of clamps of fastening of seat belts. |
| 2. Check a condition of anchor fastening of seat belts. |
| 3. Remove the panel of the lower upholstery of the central rack. |
| 4. Check a condition of natyazhitel of seat belts. |
| 5. Install the panel of the lower upholstery of the central rack. |
| 6. Extend a seat belt at all length and check that it moves forward easily and smoothly. |
| 7. Check fastenings of seat belts to uvulas of clamps. |
| 8. Press the button of a clamp and be convinced that the seat belt uvula easily leaves a clamp, and the button comes back to a starting position. Do not dismantle natyazhitel of seat belts or clamps. |
| 9. Check system of a reminder on not fastened seat belt of the driver. At turn of a key in the ignition lock in position of ON, in a combination of devices the control lamp with the image of a seat belt has to light up and sound a sound signal. The sound signal has to sound within 5–6 seconds. When fastening a seat belt of the driver the control lamp with the image of a seat belt will go out and the sound signal will cease to sound. Also at turn of a key in position of LOCK the control lamp with the image of a seat belt will go out and the sound signal will cease to sound. |
