16.60. Trunk lid


1 – luggage carrier latch;
2 – draft of a latch of a luggage carrier;
3 – luggage carrier lock cylinder;
4 – overlay of a trunk lid;
5 – trunk lid emphasis;
6 – trunk lid;
7 – block of springs and hinges;
8 – the pro-thinned-out sealing strip;
9 – shock plate of a trunk lid;
10 – squeezing trunk lid lever;
11 – cable of opening of a latch of a luggage carrier

Removal

PERFORMANCE ORDER
1. Disconnect sockets from lamps of illumination of registration plate, then take a plait of wires from a trunk lid.
Attention

You carry out removal of a trunk lid with the assistant.


2. Support a trunk lid in open situation.
3. Turn out four bolts of fastening of hinges of a trunk lid.
4. Remove a trunk lid and moisture protective consolidation from a cover.

Installation

Attention

You carry out removal of a trunk lid with the assistant.


PERFORMANCE ORDER
1. Installation is carried out to the sequences, the return to removal.
2. By hand tighten bolts of fastening of hinges of a trunk lid.
3. Close a trunk lid.
4. Check, and if necessary, adjust the provision of a trunk lid of rather adjacent surfaces before tightening of bolts.
      
Inhaling moment: 9–13 N • m
5. Check mutual position of the lock of a trunk lid and a shock plate of the lock. If necessary, weaken bolts and, moving a shock plate, adjust its situation.
     
 Inhaling moment: 7–10 N • m