16.67. Drafts of a screen wiper

Removal

PERFORMANCE ORDER
1. Remove screen wiper levers.
2. Remove the screen wiper engine.
3. Turn out seven screws and release four clips of fastening of a lattice of the air-ventilation chamber located in the windshield basis.
4. Remove a lattice of the air-ventilation chamber.
5. Turn out four nuts of fastening of axes of hinges of drafts.
6. Remove drafts of a screen wiper from the air-ventilation chamber, moving them towards the driver.

Installation

PERFORMANCE ORDER
1. Insert drafts of a screen wiper into the air-ventilation chamber, moving them from the driver.
2. Establish axes of hinges and fix them by bolts and nuts.
3. Establish draft of the drive of a screen wiper on an engine crank.
4. Install the screen wiper engine.
5. Establish a lattice of the air-ventilation chamber.
6. Install screen wiper levers.
7. Check work of brushes of a screen wiper. The screen wiper brush from the driver has to be at distance of 30±2 mm from the windshield basis, and a brush from the forward passenger – at distance of 37±2 mm from the windshield basis.