17.1. Specifications
Moments of an inhaling of threaded connections
|
Name
|
Value
| |
| Cooling | Maximum power of cooling (450 m3/h), kcal/h |
4300 ± 10%
|
| Power consumption, W |
252
| |
| Heating | Maximum power of heating (270 m3/h), kcal/h |
3900 ± 10%
|
| Power consumption, W |
220
| |
| Compressor | Productivity, cm3 |
155,5
|
| Maximum frequency of rotation, min.-1 |
9000
| |
| Lubricant, cm3 |
120
| |
| Receiver / dryer | The used dehumidifier |
XH – 9
|
| Sensor of double pressure | High pressure, kg/cm2 |
OFF:32
DIFF:6 |
| Low pressure, kg/cm2 |
OFF:2
DIFF:0,25 | |
| Carving of unions | High pressure |
M10 x 1,25
|
| Low pressure |
M9 x 1,0
| |
| Coolant | Type |
R134a
|
| Weight, |
700 ± 50
|
Moments of an inhaling, N • m
| Nuts of fastening of the block of the fan / evaporator |
8 – 11
|
| Bolts of fastening of a forward part of an arm of the compressor of the conditioner |
31 – 47
|
| Bolts of fastening of the left side of an arm of the compressor of the conditioner |
16 – 23
|
| Bolts of fastening of the compressor |
24 – 31
|
| Bolts of fastening of the fan of the condenser |
8 – 11
|
| Bolts of fastening of the condenser |
8 – 11
|
| Nuts of fastening of the block of a heater |
8 – 11
|
| Bolts of fastening of the receiver / dryer |
5 – 6
|
| Bolts of fastening of an arm of the receiver / dryer |
10 – 15
|