17:11. Condenser

Condenser

1 – condenser;
2 – condenser fan;
3 – colder tube No. 2;
4 – receiver / dryer;
5 – colder tube No. 1;
6 – the soaking-up pipe;
7 – Lang of low pressure;
8 – Lang of high pressure

Removal

PERFORMANCE ORDER
1. Discharge the air conditioning system.
2. Disconnect tubes from the condenser.
3. Turn out screws and remove the condenser.

Prevention

Insert cardboard protection between the condenser and a radiator.

Immediately close all open openings and tubes for an exception of hit of moisture of air in the air conditioning system.



Installation

PERFORMANCE ORDER
Installation of the compressor of the conditioner is carried out to the sequences, the return to removal.

Prevention

Fill in fresh oil in the compressor;

Before installation of sealing rings, oil them;

Do not grease connecting nuts of unions of the compressor of the conditioner;

At installation of the new condenser fill in 20 cm3 of fresh oil for the compressor through a tube of high pressure of the compressor.


Moment of an inhaling of nuts of fastening of tubes: 9,8–19,6 N • m