3c351ee6

2.6. Back oil sealing ring

Removal

PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the rechargeable battery.
2. Turn out bolts and remove a flywheel. If on the car the automatic transmission is installed, remove a drive plate. At a reversing of bolts, block a flywheel from a provorachivaniye.
3. Turn out bolts and remove a back cover from the block of cylinders.
4. An edge of the flat screw-driver remove a sealing ring from a back cover.

Installation
PERFORMANCE ORDER
1. Oil pure engine a nest in a back cover for a sealing ring, and also an external surface and working edges of a new sealing ring.
2. A mandrel, the corresponding diameter, establish a sealing ring in a back cover of the block of cylinders. Establish a sealing ring so that the end face of a ring settled down flush with an external surface of a back cover or acted from it no more than on 0,5 mm.
3. Clear the interfaced surfaces of a back cover and the block of cylinders of the sealant remains. At the same time be careful not to scratch a surface.
4. Establish a back cover and fix it by bolts.

Inhaling moment:
And – 7,8–10,8 N • m
In – 40,2–54,9 N • m

5. Establish a flywheel and fix it by bolts. Install the transmission. If on the car the automatic transmission is installed, establish a plate of the drive and the automatic transmission.
6. Connect a wire to the negative plug of the rechargeable battery.