3c351ee6

3.4. Replacement of an oil filter

PERFORMANCE ORDER
1. Lift the car.
2. A special key turn out an oil filter. If the rubber sealing ring of an oil filter remained on the block of cylinders, remove it.
3. Grease with a thin layer of pure engine oil a rubber sealing ring of a new oil filter.
4. Screw an oil filter before contact of a sealing ring of an oil filter with the block of cylinders.
5. Tighten the filter on 1–1/6 turns.
6. Launch the engine and check lack of leak of oil.
7. Switch off the engine and wait 5 min. for running off of oil in the pallet. Check the level of engine oil and, if necessary, bring it to norm.

Capacity of an oil filter: 0,2 l