 |
1. Disconnect the socket and turn out the oil pressure sensor from the block of cylinders. |
 |
2. For installation of the sensor screw the manometer union in openings. |
3. Launch the engine and warm up it up to the normal working temperature. |
4. With a frequency of rotation of a bent shaft of the mines-1 engine 3000 read pressure shown by the manometer. Oil pressure: 294–392 kPa
|
5. If pressure differs from the required value, find out the reason and make repairs. |
6. Turn out the union of the manometer and screw into place the oil pressure sensor. Inhaling moments: 12–18 N • m
|