Kia Sephia - the Repair manual and operation
1. Maintenance
2. Engine
3. Lubrication system
4. Cooling system
4.1. Specifications
4.2. Cooling liquid
4.3. Check of level of cooling liquid
4.4. Quality of cooling liquid
4.5. Check of tightness of the cooling system
4.6. Replacement of cooling liquid
4.7. Check of a cover of a radiator
4.8. Valve of the return pressure
4.9. Thermostat
4.10. Radiator fan relay
4.11. Radiator fan engine
4.12. Radiator
4.13. Water pump
5. Power supply system and release
6. Fuel system
7. System of ignition
8. Coupling
9. Mechanical transmission
10. Automatic transmission
11. Axes and power shafts
12. Steering
13. Wheels and tires
14. Brake system
15. Suspension bracket
16. Body
17. Air conditioning system
18. Electric equipment
4.11. Radiator fan engine
Removal
PERFORMANCE ORDER
1.
Disconnect a wire from the negative plug of the rechargeable battery.
2.
Merge cooling liquid in a suitable container.
3.
Remove a zabornik of fresh air.
4.
Disconnect the socket from the radiator fan engine.
5.
Weaken a collar and remove the top hose of a radiator.
6.
Turn out two top bolts of fastening of a casing of the fan of a radiator.
7.
Turn out two lower bolts of fastening of a casing of the fan of a radiator.
8.
Lift and remove a radiator fan casing from a motor compartment.
9.
Remove a clip and remove the radiator fan.
10.
Turn out three bolts and nuts and remove the radiator fan engine.
Check
PERFORMANCE ORDER
The ampermeter check the current consumed by the radiator fan engine as shown in the drawing.
Current: 8-13 A
Installation
PERFORMANCE ORDER
1.
Install the engine of the fan of a radiator and fix by three bolts and nuts.
2.
Install the fan and fix by a clip.
3.
Establish a radiator casing on a radiator.
4.
Screw and tighten the top bolts of fastening of a casing of the fan.
Inhaling moment: 7,8–11 N • m
5.
Screw and tighten the lower bolts of fastening of a casing of the fan.
Inhaling moment: 7,8–11 N • m
6.
Establish the top hose of a radiator and fix it by a collar.
7.
Connect the socket to the radiator fan engine.
8.
Establish a zabornik of fresh air and fix it by a bolt and a nut.
9.
Fill in necessary amount of the required cooling liquid in the cooling system.
10.
Connect a wire to the negative plug of the rechargeable battery.
11.
Launch the engine and check lack of leaks from the cooling system.