6.14. Fuel supply block

Removal

PERFORMANCE ORDER
1. Take off pressure in fuel system.
2. Disconnect a wire from the negative plug of the rechargeable battery.
3. Remove a pillow of a back seat.
4. Disconnect sockets from the fuel supply block.
5. Turn out three screws of fastening of a cover.
6. Remove a rubber ring and disconnect wires from a cover.
7. Disconnect two fuel hoses from the fuel supply block.
8. Turn out six screws and remove the block of supply of fuel from the fuel tank.

Installation

PERFORMANCE ORDER
1. Install the block of supply of fuel on the fuel tank and fix by six screws.

Inhaling moment: 10,8–16,7 N • m

2. Connect two hoses to the fuel supply block.
3. Establish a rubber ring and fix wires on a cover.
4. Establish a cover and fix by three screws.

Inhaling moment: 10,8–16,7 N • m

5. Connect the socket of power supply of the block of supply of fuel.
6. Fix socket wires by an adhesive tape.
7. Establish a pillow of a back seat.
8. Connect a wire to the negative plug of the rechargeable battery.