6.3. Activization of fuel system


After removal of pressure in fuel system, the fuel system has to be made active to avoid a long provorachivaniye a starter at start of the engine.


1. An additional wire connect the FUEL PUMP plugs (the fuel pump) and B+ of the diagnostic socket.
2. Include ignition no more than on 10 with therefore the fuel pump will begin to work and will create the required pressure in fuel system. If ignition to leave included more than on 10 with, the additional wire will strongly heat up. Check lack of leak of fuel from fuel system.
3. Switch off ignition and remove additional the wire connecting plugs of the diagnostic socket.