|
1. An additional wire connect the FUEL PUMP plugs (the fuel pump) and B+ of the diagnostic socket. |
2. Uncover a toplivonalivny mouth of the fuel tank. |
3. Include ignition. |
4. Define whether the fuel pump works, listening to the noise created by the pump through a toplivonalivny mouth of the fuel tank. |
5. Establish into place a cover of a toplivonalivny mouth. |
 |
6. If the noise created by the fuel pump is not heard measure tension between a wire of PNK/BLK of the socket of the pump and weight. Tension: 12B
|
7. If tension does not correspond to demanded, check serviceability of the relay and a power-supply circuit of the fuel pump. |
8. If tension is less than demanded, check existence of conductivity between wires of PNK/BLK and BLK of the socket of the fuel pump. |
9. If conductivity is available, replace the fuel supply block. |
10. In the absence of conductivity restore connection with weight.
|