3c351ee6

7.7. Sensor of an angle of rotation of a bent shaft

Removal

PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the rechargeable battery.
2. Disconnect a plait of wires.
3. Turn out a bolt of fastening of the sensor.
4. Remove the sensor from the transmission on models with the TED engine or from the case of the oil pump on models with the BFD engine.

Installation

PERFORMANCE ORDER
1. To install the sensor of an angle of rotation of a bent shaft on a transmission case on models with the TED engine.
Install the sensor of an angle of rotation of a bent shaft on the case of the oil pump on models with the BFD engine.
2. Fix the sensor by a bolt.
3. Connect a plait of wires.
4. Connect a wire to the negative plug of the rechargeable battery.