3c351ee6

8.6. Working cylinder of coupling


Prevention

As the liquid used in the hydraulic drive dissolves paint, substitute a suitable container for collecting liquid.

At hit of liquid on a paint and varnish covering of the car wash out its large number waters.

After a detachment of a hydraulic tube of coupling, close a tube to avoid losses of brake fluid.


Working cylinder of coupling

1 – hydraulic tube;
2 – bolt;
3 – working cylinder of coupling

Removal

PERFORMANCE ORDER
1. Lift the car and fix on support.
2. Turn out seven screws and remove an antisplash guard of a motor compartment.
3. The special OK130430019 tool disconnect a hydraulic tube from the working cylinder of coupling.
4. Turn out two bolts of fastening of the working cylinder of coupling and remove it.

Installation

PERFORMANCE ORDER
1. Install the working cylinder of coupling.
2. Screw two bolts of fastening of the working cylinder of coupling.

Inhaling moment: 18,6–25,5 N • m

3. The special OK130430019 tool connect a hydraulic tube to the working cylinder of coupling.

Inhaling moment: 12,7–21,5 N • m

4. Remove air from a hydraulic contour of coupling.
5. Check lack of leak of brake fluid from a hydraulic contour of coupling.
6. Carry out road tests of the car.