3c351ee6

9.10. Case of coupling and components of a case of the TE DOHC transmission


Prevention

Needlessly do not remove oil sealing rings.


Case of coupling and components of a case of the TE DOHC transmission

1 – external ring of the bearing;
2 – sealing ring;
3 – external ring of the bearing;
4 – bell;
5 – bolt;
6 – plate;
7 – pipe;
8 – bolt;
9 – switching lever;
10 – cylindrical pin;
11 – gear shifting rod;
12 – cover;
13 – selector;
14 – sealing ring;
15 – bolt;
16 – cover;
17 – сапун;
18 – speed sensor;
19 – bolt;
20 – speedometer drive mechanism;
21 – sealing ring;
22 – external ring of the bearing;
23 – cylindrical pin;
24 – backing lever shaft;
25 – backing lever;
26 – a stopper of discharge of oil with a washer;
27 – external ring of the bearing;
28 – diaphragm spring;
29 – adjusting laying;
30 – external ring of the bearing;
31 – adjusting laying;
32 – sealing ring;
33 – backing light switch;
34 – the channel for lubricant

Removal of an external ring of the bearing (from the forward party of a main shaft)

PERFORMANCE ORDER
After installation of a stripper OK130 170 012 in an external ring of the bearing, remove an external ring of the bearing.

Removal of a shaft of the lever of a backing

PERFORMANCE ORDER
1. Passatizhami take a cylindrical pin.

2. Protect a backing lever shaft rags and, passatizham, get it.

Removal of a sealing ring of a rod of gear shifting

PERFORMANCE ORDER
The screw-driver and the hammer remove a sealing ring of a rod of gear shifting.

Prevention

At removal of a sealing ring do not damage a coupling case.


Removal of a bell of an external ring of the bearing of a secondary shaft

PERFORMANCE ORDER

1. Remove an external ring of the bearing, lifting it together with a bell.


Prevention

If necessary, the screw-driver remove an external ring of the bearing of a secondary shaft.


2. Insert the screw-driver into an external ring of the bearing of a secondary shaft of a case of coupling.
3. Remove an external ring of the bearing.

Removal of a sealing ring of a main shaft


Prevention

At removal of a sealing ring do not damage a coupling case.


PERFORMANCE ORDER
The screw-driver remove a sealing ring of a main shaft.

Removal of a sealing ring of differential

PERFORMANCE ORDER

The screw-driver remove a sealing ring of differential.

Removal of an external ring of the bearing of differential

PERFORMANCE ORDER
1. Establish a stripper of OK130 170 012 in an external ring of the bearing of differential.
2. Remove an external ring of the bearing of differential.

Installation of a sealing ring of differential

PERFORMANCE ORDER
Using a mandrel of OK201 170 AA1, establish an oil sealing ring of differential in a transmission case nest.

Removal of a sealing ring of the drive of a speedometer

PERFORMANCE ORDER
The screw-driver remove a sealing ring of the drive of a speedometer.